Every Southern Machinery feeder is engineered to the host machine. The table shows where our feeders are documented in service; for any other model we design a custom docking plate and IO interface after a free compatibility check.
| Brand | Machine series | Southern Machinery feeders |
|---|---|---|
| Panasonic | NPM, CM602 | Tube (STF1003), bowl, tray (STP1001), terminal reel (SRT7001), solder preform (SSPC101) |
| FUJI | NXT, NXT III, AIMEX | Feeder calibration jig (S-FFCJ10), bulk terminal belt feeder, label feeder, custom nozzles (H01/H04S) |
| Yamaha | YS series, YSM20 | Radial tape (SRF1001), tube, tray, terminal reel, belt bulk |
| JUKI | RS-1, RX, JM-20 / JM-50 | Vibration stick feeder S-JVF02 (drop-in), bowl, belt (S-MVF01), radial, gripper nozzles SM2071–SM2074 |
| Samsung / Hanwha | SM320, SM321, SM411, SM431, SM471, SM481, SM482 | Label feeder LFSUMSUNG, radial square-capacitor feeder |
| ASM / Siemens | SIPLACE | Label feeder, SX2 gripper, custom interface feeders |
| Universal (UIC) | Radial / axial / odd-form | Axial (ATF-1002), belt bulk, tube |
| Mirae | Odd-form machines | Tube, bowl, radial, tray |
What we check before quoting
- Machine model and software revision
- Feeder bank type, free slot width and mounting rail
- IO / signal interface (aviation plug, bank connector or standalone with robot)
- Pick position height and nozzle or gripper reach
- Component samples, packaging and target cycle time
Send these details to [email protected] or WhatsApp and we reply within 2 hours.
FAQ
Can a feeder be moved between machine brands?
Usually only with a different docking plate and interface cable. Tell us all the machines you run and we design for interchangeability where possible.
Do you support older placement machines?
Yes. Many projects retrofit odd-form feeding onto older JUKI, Panasonic and Universal machines.